Introduction: The Fine Line Between a View and a Leak
The UnitX inspection cell is designed to handle large automotive glass componeThe sunroof is an important exterior component that defines the visual aesthetic of a modern vehicle. However, ensuring it seals perfectly to the roof is a critical manufacturing challenge.
The integrity of a sunroof relies heavily on the application of the 뇌관 그리고 Adhesive Bead. If the primer is missing, the glass won’t bond securely. If the adhesive bead has a gap, water will find its way in. Furthermore, surface flaws like paint chips or scratches can ruin the visual appeal of the vehicle’s exterior.
Manual inspection of these large glass panels is slow and prone to error. Operators struggle to consistently check meters of black adhesive against black glass, leading to fatigue and missed defects.
The Challenge: Black-on-Black Inspection
The project goal was to automate the inspection of the sunroof to meet stringent OEM quality standards.
The Technical Hurdle:
The primary defects involve the 뇌관 Adhesive Bead. Visually, this is often a “black-on-black” inspection challenge—detecting black primer or glue on dark glass or metal frames. Standard vision systems struggle with this low contrast.
Defect Scope:
- 밀봉 무결성: Gaps in the bead, missing primer, or inconsistent bead width.
- 표면 품질 : Scratches and chips that degrade appearance.
The customer needed a solution that could improve OEE(전체 장비 효율성) by replacing the slow manual process with a high-speed automated system.
Precision inspection of the sunroof edges is required to prevent water leaks and wind noise.
The Solution: High-Speed AI Processing
UnitX deployed a dedicated inspection station powered by CorteX AI.
시스템 접근 방식:
- AI Segmentation: Unlike rule-based systems that look for simple edges, the UnitX AI is trained to segment the adhesive bead and primer path. It “understands” what a good bead looks like and flags interruptions or irregularities.
- 추적성: The system captures defect images for every sunroof, allowing the manufacturer to track quality trends over time (e.g., identifying a specific robot nozzle that is clogging).
Results: 1 Second to Verify the Seal
The automation provided the speed and reliability necessary for high-volume automotive assembly.
1. Blistering Speed
- 사이클 타임 : 1 두 번째.
- The system analyzes the entire perimeter of the sunroof in just one second. This is significantly faster than any manual inspection could achieve, removing the bottleneck from the glass bonding station.
2. Reliable Leak Prevention
- False Acceptance Rate: <1의 %.
- The system ensures that sunroofs with compromised primer or adhesive paths are stopped before they are installed on the car, preventing costly water leak repairs later in the assembly process (or at the dealership).
3. 운영 효율성
- False Rejection Rate: ≤ 5 %.
- By maintaining a low false rejection rate, the system balances safety with yield, ensuring efficient production flow.
Defect Visualization
The images below highlight the AI’s capability to detect subtle anomalies in the primer/adhesive application.
UnitX AI (bottom row) precisely identifies gaps and inconsistencies in the adhesive bead and primer application.
맺음말
A leaking sunroof is one of the most damaging defects for a car brand’s reputation. UnitX helps manufacturers seal the deal by automating the inspection of critical primer and adhesive beads. With a 사이클 시간 1초, we ensure that every sunroof is water-tight and road-ready.
Prevent leaks before they happen.
문의하기 UnitX to discuss your automotive glass inspection needs.
